TS.BREAKER

12*6.5*4cm

Product Description 

TS.BREAKER is  a dual overdrive guitar pedal and the ultimate tone machine, providing a  variety of delicious tones. It can be used as an always on drive tone  all the way to a mid boosting lead tone. Our take on the legendary TS9 Tube Screamer-style overdrive and the Black Box Bluesbreaker, it features two independent overdrives, giving you two classic drive sounds favored by many guitarists in one enclosure.



The TS.BREAKER is divided into a side Bluesbreaker(left) and a side TS9  (right), separated by the order toggle switch in the middle which flips  the internal order of the effects and hence the signal path from guitar  to amp.

Side  B features the Bluesbreaker-style circuit with external knobs for GAIN,  TONE, VOLUME and a two position toggle switch labeled CLIPPING. The  clipping switch toggles between Two Clipping models soft and hard .

The  side T features the TS9-style circuit with external knobs for DRIVE,  TONE, LEVEL and a two position toggle switch labeled CLIPPING. The  clipping switch toggles between Two Clipping models .

Both sides can be used separately or stacked.

TRS  split: Besides using the two sides of 'TS.BREAKER in serial mode,  either T->B or T<-B, . The two 1/4" jacks, which in serial mode  are used for signal in and out, will in split mode serve as IN+OUT for  each side.

PLEASE NOTE THAT THE EXTERNAL ORDER TOGGLE SWITCH MUST BE IN UP POSITION T <- B

Features:

Side B (left)

- Replica of the circuit of the first BB1 - Black Box Blues Breaker circuit.

- External two position clipping toggle switch for two models clipping response

Side T (Right)

- Exact replica of the TS9 -circuit.

-  External two position Clipping switch to switch between a pair of si -  or a pair of led clipping diodes in the overdrive gain stage.


 External switch to choose in which order the signal passes through the two circuits.




- Dimension: 

115 mm x 95 mm x 35 mm

 

POWER:

The TS.BREAKER requires a regulated 9-volt DC power supply with standard 2.1mm jack tip negative polarity.

The max power consumption of the is 100mA (+9VDC). If operated with a power supply with insufficient current

capabilities, it will affect the performance. So make sure your +9V-DC power supply is capable of delivering 100mA.

We recommend you to use a quality power supply with isolated outputs.